Camerton Audio Binom-ER — Flagship Isodynamic (planar-magnetic) Headphones
May 19, 2023 at 8:04 AM Post #31 of 64
So now briefly to the Camerton
With the perforated leather pads....simply horrible....too much in the treble....very sharp/harsh 🙈😝
Then there was a second pair of ear pads which are cosmetically unusable....but tonally this was better,no longer sharp..but in the lower range too much thickened up
I put it kindly.....the Binom Headphone has recognizable potential 👍
In how far Oleh gives away this is probably because of how much he is still struggling to make the right ear cushion
Good tip from my side to him...take the time for the trial & error what you need for it because would be a shame because the industrial design
makes a very good impression on me 👍

NOMAX

PS.lol
 
Last edited:
May 21, 2023 at 7:50 AM Post #32 of 64
So now briefly to the Camerton
With the perforated leather pads....simply horrible....too much in the treble....very sharp/harsh 🙈😝
Then there was a second pair of ear pads which are cosmetically unusable....but tonally this was better,no longer sharp..but in the lower range too much thickened up
I put it kindly.....the Binom Headphone has recognizable potential 👍
In how far Oleh gives away this is probably because of how much he is still struggling to make the right ear cushion
Good tip from my side to him...take the time for the trial & error what you need for it because would be a shame because the industrial design
makes a very good impression on me 👍

NOMAX

PS.lol

Thanks for this feedback. I was looking for their booth at the show but couldn't find it :)
 
iFi audio Stay updated on iFi audio at their sponsor profile on Head-Fi.
 
https://www.facebook.com/people/IFi-audio/61558986775162/ https://twitter.com/ifiaudio https://www.instagram.com/ifiaudio/ https://ifi-audio.com/ https://www.youtube.com/@iFiaudiochannel comms@ifi-audio.com
May 21, 2023 at 8:54 AM Post #33 of 64
Opposite the Audeze stand 👍

NOMAX
 
May 21, 2023 at 10:30 AM Post #35 of 64
May 25, 2023 at 9:27 AM Post #37 of 64
Interesting. I heard the Binom-ER on Sunday but it was obviously too loud to get more than a cursory listen in. I liked what I heard but obviously I am aware that the showfloor noise makes any critical listening impossible.

Audioessence has the Binom-ER in their inventory now with a delivery time of 1-2 weeks.
 
May 25, 2023 at 6:30 PM Post #38 of 64
20230521_125949_HDR.jpg

It was not bad at all. It was even Very good, as much as the noisy hall allowed it to judge.
I had a comfort issue though. Same as with Abyss Diana - the angle of the pad cannot be freely adjusted. When it fits on the top, the bottom has 10mm distance from earlobe - on my head. Not enveloping.

The furry pad gave a bit strange feeling, but I guess that can be get used to.
 
May 28, 2023 at 7:28 AM Post #39 of 64
20230521_125949_HDR.jpg
It was not bad at all. It was even Very good, as much as the noisy hall allowed it to judge.
I had a comfort issue though. Same as with Abyss Diana - the angle of the pad cannot be freely adjusted. When it fits on the top, the bottom has 10mm distance from earlobe - on my head. Not enveloping.

The furry pad gave a bit strange feeling, but I guess that can be get used to.

Build quality looks top notch, at least that's what I gather from your photo. Would you confirm that?
 
iFi audio Stay updated on iFi audio at their sponsor profile on Head-Fi.
 
https://www.facebook.com/people/IFi-audio/61558986775162/ https://twitter.com/ifiaudio https://www.instagram.com/ifiaudio/ https://ifi-audio.com/ https://www.youtube.com/@iFiaudiochannel comms@ifi-audio.com
May 29, 2023 at 5:42 PM Post #40 of 64
I have a reason to be excited!! After visiting Camerton's Facecbook page, I spotted the Headphones[.com] team at the booth with the Binom-ER. Very curious what they have to say about it, I must say.
https://scontent.fbeg5-1.fna.fbcdn.net/v/t39.30808-6/348314306_636543471826565_3626147791391738569_n.jpg?_nc_cat=101&ccb=1-7&_nc_sid=8bfeb9&_nc_ohc=92uBT3dyCQ0AX-8eM41&_nc_ht=scontent.fbeg5-1.fna&oh=00_AfDTdZIXvZu70rOShW4krg5mEFNTqh0Tr6D_2aIFW-UdHA&oe=64798D4D
 
May 29, 2023 at 5:43 PM Post #41 of 64
I have a reason to be excited!! After visiting Camerton's Facecbook page, I spotted the Headphones[.com] team at the booth with the Binom-ER. Very curious what they have to say about it, I must say.
https://scontent.fbeg5-1.fna.fbcdn.net/v/t39.30808-6/348314306_636543471826565_3626147791391738569_n.jpg?_nc_cat=101&ccb=1-7&_nc_sid=8bfeb9&_nc_ohc=92uBT3dyCQ0AX-8eM41&_nc_ht=scontent.fbeg5-1.fna&oh=00_AfDTdZIXvZu70rOShW4krg5mEFNTqh0Tr6D_2aIFW-UdHA&oe=64798D4D

At this time any feedback about these cans is precious and I also look forward to what chaps from Headphonesdotcom have to say!
 
iFi audio Stay updated on iFi audio at their sponsor profile on Head-Fi.
 
https://www.facebook.com/people/IFi-audio/61558986775162/ https://twitter.com/ifiaudio https://www.instagram.com/ifiaudio/ https://ifi-audio.com/ https://www.youtube.com/@iFiaudiochannel comms@ifi-audio.com
May 29, 2023 at 8:39 PM Post #42 of 64
@GoldenOne

How did you feel about the Camertons, or was it too short of an audition or loud in terms of ambient noise to really have much to say? No worries either way!
 
May 31, 2023 at 9:10 AM Post #44 of 64
Build quality looks top notch, at least that's what I gather from your photo. Would you confirm that?

Build quality looks top notch based on photo. That I can confirm 😁
In reality - it felt good, nothing plasticky or squeaking. Maybe it doesn't have any plastic part at all. I have not examined it closer.
 

Users who are viewing this thread

Back
Top