Dear friend,
Hi, thanks for the interest. At the end of this month as well.
Best regards
Stay updated on FiiO at their sponsor profile on Head-Fi.
|
Dear friend,
Stay updated on FiiO at their sponsor profile on Head-Fi.
|
First up, we have the Fiio FD15, a single DD that should retail for around $150 - 200 USD.
... we have the Fiio FA19. This is a 10 Knowles BA set ...
I saw the fuse of R9 is placed at the iec socket which is easy to upgrade. I found no on the K19 iec socket. is the fuse moved inside? or no fuse at all? what is the spec of the fuse?Dear friend,
Hi, thanks for the interest. At the end of this month as well.
Best regards
I bet you will!Guys wish me luck
Changing fiio k7 + PL 50 power supply to K9 AKM
i hope i will be satisfied , 2x the price of current setup.
Dear friend,Saw somewhere that they will be selling this cable separately (LC-RC 2024). Will it be shipped with the new FD15?
Hi @FiiO, is this the same chassis as the FA7S/FD5, but only with a different faceplate? Or a new design altogether? Thanks!
Stay updated on FiiO at their sponsor profile on Head-Fi.
|
Dear friend,I saw the fuse of R9 is placed at the iec socket which is easy to upgrade. I found no on the K19 iec socket. is the fuse moved inside? or no fuse at all? what is the spec of the fuse?
Stay updated on FiiO at their sponsor profile on Head-Fi.
|
Dear friend,@FiiO why don't you try to use 2 in parallel buf634a (in optimal thermal pad package) output configuration instead of OPA926 to TPA6120A2 switchable output for new devices? Switchable BW biasing in this configuration should be a win! There is even no need to use series resistor to provide very small internal impedance due to buf634 has internal thermal protection.
(De)motivation: I'm little frustrated and tired to see hyped THX AAA 788+ measurements, where distortions in non-desktop supply mode (OPA926 output?) drammatically increased on 10 kHz and above...
(TPA6120A2 is also non hi-res amp. with large internal impedance and added series resistors)
Stay updated on FiiO at their sponsor profile on Head-Fi.
|
I mean desired hypotethical product using 2 in parallel thermal-effective (non SOIC) packages of BUF634a (x8 total) in balanced output stage with no addition of serial resistors and no semiconductor mute-switches after BUFs (equipped ES9038pro or AK4499 DACs). That should provide 500 mA continuous load ability and great electrical damping-factor for low-impedance IEMs (and some HP).Hi, which product are you asking? I could try to check with the product manager for you.