Jawed's latest activity
-
Hi. Reading this thread about the optical link some weeks ago, I decided to give it a try and started to order all the necessary things... -
Jawed replied to the thread Watts Up...?.Thanks, so it seems like in Hugo M Scaler the decimation filter for 176.4KHz is less capable and there is no dedicated noise shaping for...
-
Quartet's single BNC and optical OP is different to the Hugo M scaler - I decided to fix the OP at 176.4/192k as it then allowed for an...
-
Jawed replied to the thread Watts Up...?.@Rob Watts With Hugo M Scaler, when fed 44.1KHz sample rate music, the output over TOSLINK is 176.4KHz and uses approximately 250,000...
-
Yes Quartet M scaler will have 176.4/192 kHz toslink OP, plus 176.4/192 kHz coax and of course dual BNC at 705.6/768 kHz. On another...
-
Jawed replied to the thread Watts Up...?.@Rob Watts does Quarter Scaler have a TOSLINK output?
-
Jawed replied to the thread Watts Up...?.Advertised for CanJam, I have no idea whether there are slides or a video...
-
Jawed replied to the thread Watts Up...?.Apparently lots of analogue talk by Rob at the recent New York CanJam: Digital Isn’t 3:00p to 4:00p Digital is digital, it's all ones...
-
No - the PSUs need to be independent to prevent RF current flows. The new PSU works by having an extremely high impedance at RF - in...
-
I think its not a good idea to feed both Dave and Scaler off the same supply as noise gets a short route from scaler to DAC. I rather...
-
Jawed replied to the thread Watts Up...?.Is the PSU designed to support more than one external component simultaneously? e.g. could the PSU support the Quartet Scaler and a DAVE 2?
-
Jawed replied to the thread Watts Up...?.Since that video was deleted, the replacement is: This is "editorialised" and I think some of what Rob said has been lost when...
-
First hour with a DAVE coming from a TT2. *drools over self and everything* Can I just say thank you to everyone who's ever gushed...
-
Jawed replied to the thread Hugo TT 2 by Chord Electronics - The Official Thread.Good, you admit you were wrong:
-
Jawed replied to the thread Hugo M Scaler by Chord Electronics - The Official Thread.DAVE and the amplifier you're using to drive your speakers are subject to RF noise via their connection to the mains. One or both of...
